Tsarin Musamman na China OEM Polycarbonate Medical Plastic Allura Mold tare da Takaddun Shaida na ISO
"Inganci da farko, Gaskiya a matsayin tushe, kamfani mai gaskiya da riba ta juna" shine ra'ayinmu, don ƙirƙirar akai-akai da kuma bin kyakkyawan tsari don Tsarin Musamman na China OEM Polycarbonate Medical Plastic Injection Mold tare da Takaddun Shaida na ISO, Bayan haka, kamfaninmu yana manne da inganci mafi kyau da ƙima mai ma'ana, kuma muna kuma samar da masu samar da OEM masu kyau ga shahararrun samfuran da yawa.
"Inganci da farko, Gaskiya a matsayin tushe, kamfani mai gaskiya da ribar juna" shine ra'ayinmu, domin ƙirƙirar abubuwa akai-akai da kuma bin diddigin kyakkyawan aiki donMold ɗin Roba na China da Mold ɗin Allurar Roba ta LikitaMuna kuma samar da sabis na OEM wanda ya dace da takamaiman buƙatunku da buƙatunku. Tare da ƙungiyar injiniyoyi masu ƙwarewa a cikin ƙira da haɓaka bututu, muna daraja kowace dama don samar da mafi kyawun samfura da mafita ga abokan cinikinmu.
Poly (DL-lactide-co-glycolide)wani polymer ne mai lalacewa wanda ake amfani da shi wajen kera na'urorin likitanci. An yi shi ne da lactic acid da glycolic acid. Poly (DL-lactide-co-glycolide) na iya lalacewa ta hanyar hydrolysis don samar da lactic acid da glycolic acid, waɗanda duka abubuwa ne da ke faruwa a jiki ta halitta.
| Abu | Bayani dalla-dalla |
| Bayyanar | Barbashi fari ko rawaya |
| Danko na ciki | 0.2-2.5dl/g |
| Matsakaicin danko MW | 1-100w |
| Matsakaicin lamba MW | 1-100w |
| Zafin Canjin Gilashi | 40-60℃ |
| Wurin narkewa | — |
| Saura monomer | Matsakaicin 1% |
| Sauran sinadarin narkewa | Matsakaicin 0.05% |
| Karfe masu nauyi | Matsakaicin 10 ppm |
| Yawan yawa | 1.20-1.30 g/cm3 |
| Tokar Sulfate | 1.20-1.30 g/cm3 |
1.PLGAwani nau'in polymer ne mai kama da na copolymer da kuma amorphous.
2. Ana amfani da shi sosai a cikin dinkin tiyata, membrane na hana mannewa da kuma tsarin injiniyan nama.
| PLA | 26100-51-6；26023-30-3 |
| PCL | 24980-41-4 |
| PSA | |
| PBS | 25777-14-4 |
| PBAT | 55231-08-8 |
| AMPPD | 122341-56-4 |
| APS-5 | 193884-53-6 |
| Caprolactone | 502-44-3 |
| PGA | 26009-03-0 |
25kgs/ganga, tan 9/kwantenar 20'
25kgs/jaka, tan 20/kwantenar 20'
"Inganci da farko, Gaskiya a matsayin tushe, kamfani mai gaskiya da riba ta juna" shine ra'ayinmu, don ƙirƙirar akai-akai da kuma bin kyakkyawan tsari don Tsarin Musamman na China OEM Polycarbonate Medical Plastic Injection Mold tare da Takaddun Shaida na ISO, Bayan haka, kamfaninmu yana manne da inganci mafi kyau da ƙima mai ma'ana, kuma muna kuma samar da masu samar da OEM masu kyau ga shahararrun samfuran da yawa.
Tsarin Musamman donMold ɗin Roba na China da Mold ɗin Allurar Roba ta LikitaMuna kuma samar da sabis na OEM wanda ya dace da takamaiman buƙatunku da buƙatunku. Tare da ƙungiyar injiniyoyi masu ƙwarewa a cikin ƙira da haɓaka bututu, muna daraja kowace dama don samar da mafi kyawun samfura da mafita ga abokan cinikinmu.
